Kyocera Mobile Recovery Mode

Kyocera / By

Here is the complete guide about How to entering into Recovery mode on Kyocera Mobile. You don’t need any software or Computer to access Recovery mode.

If your phone running slow or forgot your phone password, or phone not responding, etc, You must enter to Android recovery mode to fix these problems.

 

What can do with Recovery Mode?

  • Reboot system
  • Wipe data
  • Factory Reset
  • Software update from ADB or SD card
  • Run graphics tests

 

 

Kyocera Mobiles List

  1. Kyocera DuraForce Pro 2
  2. Kyocera Basio
  3. Kyocera Brigadier
  4. Kyocera Digno C
  5. Kyocera Digno Rafre
  6. Kyocera Digno S
  7. Kyocera Digno U
  8. Kyocera DuraForce
  9. Kyocera DuraForce Pro
  10. Kyocera DuraForce XD
  11. Kyocera DuraScout
  12. Kyocera Echo
  13. Kyocera Event
  14. Kyocera Honey Bee 201K
  15. Kyocera Hydro
  16. Kyocera Hydro Air
  17. Kyocera Hydro EDGE
  18. Kyocera Hydro Elite
  19. Kyocera Hydro Icon
  20. Kyocera Hydro Life
  21. Kyocera Hydro Plus
  22. Kyocera Hydro Reach
  23. Kyocera Hydro Shore
  24. Kyocera Hydro Vibe
  25. Kyocera Hydro VIEW
  26. Kyocera Hydro WAVE
  27. Kyocera Hydro XTRM
  28. Kyocera Luce KCP01K
  29. Kyocera Milano
  30. Kyocera Miraie
  31. Kyocera Qua
  32. Kyocera Qua Tab 01
  33. Kyocera Rise
  34. Kyocera Torque
  35. Kyocera Torque G02
  36. Kyocera Torque KC-S701
  37. Kyocera Torque XT
  38. Kyocera Urbano L01
  39. Kyocera Urbano L02
  40. Kyocera Urbano Progresso
  41. Kyocera Urbano V01
  42. Kyocera Urbano V02
  43. Kyocera Zio M6000

 

 

What is Recovery Mode?

Android Recovery Mode is an independent and lightweight runtime environment that is included on a separate partition from the main Android operating system on the Android device.

Which allows you to Wipe data or factory reset, Reboot system and update software, etc without entering into your phone.

You can enter into recovery mode without password or pattern lock or PIN.

You can use this option if you want to unlock your phone, Update phone software from SD card and Reboot to speed up your phone, etc.

Kyocera Recovery Mode

 

 

Enter into Recovery Mode with Buttons

Method 1

  • Power off your Kyocera Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button.
  • After that, Release both Buttons when you see Kyocera Logo or Android Logo appears.
  • Now you can see Android Recovery Mode.
  • Use volume buttons to move and power button to select any option.

 

Method 2

  • Power off your Kyocera Mobile, by holding the power button.
  • Hold down the Volume Down + Power Button.
  • After that, Release both Buttons when you see Kyocera Logo or Android Logo appears.
  • Now you can see Android Recovery Mode.
  • Use volume buttons to move and power button to select any option.

 

Method 3

  • Power off your Kyocera Mobile, by holding the power button.
  • Hold down the Volume Up + Home + Power Button.
  • After that, Release both Buttons when you see Android exclamation mark appears.
  • Now you can see Android Recovery Mode, if not (While holding down the Power button press and release Volume Up Button).
  • Use volume buttons to move and power button to select any option.

 

Method 4

  • Power off your Kyocera Mobile, by holding the power button.
  • Hold down the Volume Up + Power Button.
  • After that, Release both Buttons when you see Android exclamation mark appears.
  • Next, While holding down the Power button press and release Volume Up Button.
  • Now you can see Android Recovery Mode.

 

 

Options in Recovery Mode

You can see below options in Kyocera Mobile Recovery mode. You may also see fewer options for some Android operating systems.

Reboot System Now: You can Reboot your Android phone with this option. Reboot process closes all running programs in your mobile. No data will be deleted after reboot.

 

Reboot to Bootloader: If you want to flash your device firmware, You need your phone to enter bootloader mode.

 

Apply update from ADB: This option used by developers to change firmware and recovery etc with ADB (Android Debug Bridge).

 

Apply update from SD card: If you want to update your phone software via SD card, Use this option. You must already download software in your SD card.

 

Wipe Data/Factory Reset: This option will erase all data (Photos, apps, and music files, etc) on your phone. You won’t recover your data after applying this option. You can use this option when you forgot the password.

 

Wipe cache partition: This option deletes all cached data which is generated by Android apps. No personal data (Media files, apps, and contacts, etc) will be deleted.

 

Mount / System: You can mount a partition (System or data) with this option. It allows you to modify anything on that partition. The mount/system option is usually seen in CUSTOM RECOVERY and not in stock recovery mode.

 

View Recovery logs: You can see Recovery logs here.

 

Run graphics test: You can run graphics test here.

 

Power off: You can switch off your device with this option.

 

Lacking storage booting: Use this option, If your phone flash memory full or close to full. If your phone flash memory full, It will slow down. So if your phone is in a bootloop, and the storage is almost all used or close to full, use this option.