Any Phicomm Phone Flash File Download [Stock ROM or Firmware]

Here you can download flash file for Phicomm Android Phone. You can download and install the latest and original stock ROM (Firmware) for free. Also, flash tools available to flash your mobile.

Flashing stock firmware will permanently delete your device data. So backup all personal data like photos, contacts, and apps, etc to prevent data loss.

Page Contents

What is Android Flashing?

Android Flashing means removing stock firmware (Software) from android device and replace with same version or any other version. Simply, flashing means changing the operating system. You can flash your device with Recovery mode or Flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues and improve device performance. Flashing delete all your device data like photos, contacts, and apps, etc.

Phicomm Phones List

Select your mobile below to download the latest Phicomm flash file for your phone. All Phicomm phone list available here.

Flashing Phicomm with Recovery Mode

You don’t need any flash tool or Computer or any other USB drivers to flash the firmware of Phicomm with this method. You need just a flash file.

This process will erase all your Mobile data like

Google and other accounts
Downloaded Apps
Media files (Photos, Videos, and Music files)
Contacts
System and app data
App settings

Method – 1

This method deletes all your device data. So backup all data like photos, contacts and any other personal files, etc before flashing your phone. If you don’t understand recovery mode, please exit from it and contact the nearest customer support center.

Download the Firmware file and move to SD Card storage.
Then remove the SD card.
Power off your Phicomm Mobile, by holding the power button.
Hold down the Volume Up + Power Button [Volume Down + Power Button].
Release all buttons when you see Boot Mode appears on your screen.
Then choose Recovery option, by using to navigate Volume Buttons and to confirm Power Button.
Next, You will see Android exclamation mark.
While holding down the Power button press and release Volume Up Button.
Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button.

Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
Select reboot system now option.
Now, insert the SD card.
Next, Firmware file must be in main storage {Do not put the file in the folder}, Like its below.

Now Locate Downloaded Firmware file from Storage.
After that, Tap on the Firmware file and install it.
You have successfully updated your phone Firmware.

Method – 2

Download the Firmware file and move to SD Card storage.
Then remove the SD card.
Power off your Phicomm Mobile, by holding the power button.
Hold down the Volume Up + Power Button [Volume Down + Power Button].
Release all buttons when you see Boot Mode appears on your screen.
Then choose Recovery option, by using to navigate Volume Buttons and to confirm Power Button.
Next, You will see Android exclamation mark.
While holding down the Power button press and release Volume Up Button.
Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button.
Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
Select reboot system now option.
After wiping completed, insert SD card.
Now again go to recovery mode and Choose option Apply update from SD.
In this step, Locate Downloaded Firmware file from Storage.
Tap on the Firmware file and install it.
You have successfully updated your phone Firmware.

How to Exit Recovery Mode

You must exit from recovery mode if you stuck at any operation or don’t understand recovery. Follow these steps to come out from recovery.

After you enter the Recovery Mode menu.
Now choose option Reboot, using Volume buttons and press the Power button to confirm.
After that, Your device will be rebooted automatically.
You have successfully exited Recovery mode.

Note: You can also exit recovery mode by pressing the power button for a while.

Flashing Phicomm with Flash Tool

You need Computer, flash tool, flash file, USB drivers, and USB cable to flash with this method. All data will be deleted after flashing, so backup all personal data like photos and contacts, etc to prevent data loss.

Follow these steps to flash your Phicomm Android phone with flash tool.

First download the Phicomm flash file, flash tool, and USB drivers on your PC.
Then, Install the USB drivers for your Android phone.
Next, launch Flash tool on your computer.
Then, switch off your Phicomm mobile.
Next, press and hold
1. Volume Up + Power Button {or}
2. Volume Down + Power Button
After that, Connect your Phicomm phone to the computer with a USB cable.
Then, browse the flash file in the flash tool and click on the download button.
Now flashing start on your phone.
Flashing takes 10 to 15 minutes. Please wait until flashing completed.
After flashing completed, Your device automatically rebooted.
Flashing done on your mobile.
Finally, remove the phone from the PC.